Phototex datasheet
Phototex datasheet.
Phototex is very easy to print, hang and liquid lamainate. For further processing ‘hints and tips’ then have a look at the datasheet. A more detailed application sheet describes the best process for mounting Phototex. The recycling datasheet provides details of Phototex once before and after printing.
Compatibility of Phototex
- Inkjet Piezo (solvent ink)
Mutoh, Oce, NUR, Mimaki, Colorspan, Scitex, Vutek, Roland, Gandinnovations, Seiko et al - Inkjet Thermal (pigment ink)
HP, Kodak/Encad, Colorspan, Canon et al - UV-curable ink
Vutek, Durst, Zund, 3M, NUR, Mimaki, Inca et al - Inkjet Piezo (pigment ink)
Epson, Mutoh, Roland, Mimaki et al - Litho & Screen Printing
All types
Phototex specification
Composition
40-45% polyester, 40-45% Pulp Cellulose / .010 mil total
Weight/Caliper
240 gsm / 280 micron
Backing
easy peel PET
Outdoor performance
Wind tested to 500 mphUp to 6-12 months weather proof if printed with pigment inks, water based, Solvent and UV inks – all results may vary by region
No warranty outdoors with eco-solvent inks – results vary
Fire performance
Fire retardant up to 450°C (842°F) Self Extinguishing.
Disclaimer
For best results please follow carefully the instructions in the above application sheet.
*All The above mentioned data is true at time of creation, however due to the developing nature of the components, suitability should be checked on printers and mounting surfaces before commencing your planned application. We assume no liability from technical changes in printers and/or inks.